Power Factor Corrected Charger: The PFC charger uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.

Safe and reliable: The MS Series is ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and UL 1741 for off grid and renewable energy installations.

Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter?s easy-to reach terminal block, connect the batteries, and switch on the power.

Pure sine wave: Power your T.V.'s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

Upgradeable memory: The inverter is designed with Flash programming for easy memory upgrades.

Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

Accessible design: The extra large AC access cover with terminal screw block and 360 DC connection terminals with covers make this inverter more accessible when it needs to be.

Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

Expanded transfer relay: 60 Amp transfer service is available on all models.

Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.

Standard Features:

2000 Watt Inverter with 100 Amp Battery Charger and 30A single input
MS2000 model without dual AC branch rated output breakers available
Shelf, Bulkhead or Upside Down Mounting
Pure Sine Wave Output
Power Factor Corrected Charger (Sine Wave)
RS485 Standard
Remote Port
Network Port
Flash Programming
ON/OFF Inverter-mounted Switch with LED Indicator
60 Amp Transfer (on Dual IN / Dual OUT Models)
Extra Large AC Access Cover with Terminal Screw Block
360 degree DC Connection Terminals with Covers
Battery Temperature Sensor - for optimum battery charging
Aluminum Cover
Smooth, Aesthetically Pleasing Design
ETL listed to UL/cUL 458 Optional Equipment Remote Control ME-RC50 - for convenient finger tip operation AGS Modules - automatically starts and stops your generator Smart Shunt - provides precise DC voltage and current measurements Stacking Cable Kit - designed to accommodate dual inverter configurations