The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units. When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. •Ultra-fast Maximum Power Point Tracking (MPPT)
•Advanced Maximum Power Point Detection in case of partial shading conditions
•Automatic battery voltage recognition for 12, 24, 36 or 48 Volt banks
•Up to 150 Volts input voltage
•Provides three stage temperature compensated charging with a flexible charge algorithm
•Over-temperature protection and power de-rating when temperature is high.
•Battery temperature sensor included
•Compatible with Color Control GX for intuitive control of all connected products
•Built in digital display
•Maximum efficiency 98%
•Dimensions 350mm x160mm x 135mm (Approx 13.8" x 6.3" x 5.3")
•This solar charge controller has its own LCD screen to facilitate programming
•NEW UL 1741 and CSA C22.2 Certification